Hikvision 4 Camera IP long range kit, 500m-1.2KM, 16ch NVR, Ubiquity Litebeams Gen2, 30m Night vision

R 15,995.00

Hikvision 4 Camera IP long range kit, 500m-1.2KM, 16ch NVR, Ubiquity Litebeams Gen2, 30m Night vision

Kits contains

1 x Hikvision 16ch IP NVR up to 8MP, 16POE

1 x 2TB Hard drive 

4 x Hikvision 2MP IP bullet camera, 30m Night vision

1 x Hikvision 4-port 100mbs unmanaged POE switch

2 x UBIQUITI 5GHZ LITEBEAM AC GEN2

1 x 100m Cat5

With this setup you can place the 4 cameras between 500m-1.2km's away from the 2nd litebeam - Direct line of sight with no obstacles 

You can add up to 12 extra camera connected directly to the NVR

Set up

Have 4 cameras linked to one switch 

 

From the switch run a single cable to the Nanobeam, it is a little convex dish that transmits 450mbs  of data in a PTP (point to point) setup.

 Second dish to be placed in the location near you NVR to receive and send the data back and forth.

The setup is al really easy. Make sure there is good line of sight between the two dishes, no trees, power lines or building between the two, if there are just try your best to make sure its bellow of to the side of it.

First set up would be connecting the two unit to each other via a short lan cable to a desktop or laptop and running the UBNT wizard to install and configure the required bridge network

Then connect the 2nd Litebeam to the NVR with a network cable, and connect the NVR to a TV or monitor using either a HHDMI or VGA cable

Specs

Hikvision 16ch 4K NVR 16 POE 8MP

DS-7616NI-K2/16P is Hikvision's New 16ch  4K video NVR with 16 POE ports accepting up to 8MP cameras using the latest H265 compression, with incoming bandwith of 160Mbps.

 

From the world No.1 manufacturer of DVR's & NVR's this is Hikvision's new DS-7616NI-K2/16P network video recorder with 4K Ultra High Definition video output. This impressive NVR has up to 4K (8MP) resolution recording with 160Mbps incoming bandwidth, 160Mbps outgoing bandwidth and 2 SATA interfaces for installing up to 2 x 6TB hard drives (12TB Max). It uses the latest H.265 video encoding for 40-50% lower bit rates and storage than traditional H.264. 16 built in POE ports provide data and power allowing plug and play capability when using Hikvision IP cameras for easy installation. We recommend using Hikivision cameras to guarantee compatibility and easy set up

Video/Audio Input
Two-way audio input: 1-ch, RCA (2.0 Vp-p, 1kΩ)
IP video input: 16-ch
Network
Incoming bandwidth: 160Mbps
Outgoing bandwidth: 160Mbps
Video/Audio Output
HDMI Output: 1-ch, resolution: 4K(3840*2160)/60Hz, 4K(3840*2160)/30Hz, 1920*1080P/60Hz, 1600*1200/60Hz, 1280*1024/60Hz, 1280*720/60Hz, 1024*768/60Hz
Recording Resolution: 8MP/6MP/5MP/4MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Audio Output: 1-ch, RCA (Linear, 1kΩ)
VGA Output: 1-ch, resolution: 1920*1080P/60Hz, 1280*1024/60Hz, 1280*720/60Hz, 1024*768/60Hz
Decoding
Capability: 8-ch@1080P
Live view / Playback: 8MP/6MP/5MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Hard Disk
SATA: 2 SATA interfaces for 2 HDDs
Capacity: Up to 6TB capacity for each HDD
External Interface
Network Interface: 1RJ-45 10/100/1000Mbps self-adaptive Ethernet interface
USB Interface: 2, USB2.0
Alarm In: 4-ch
Alarm Out: 1-ch

Camera

Hikvision 2MP IP Network Bullet Camera, 30M IR

 

2MP IP NETWORK BULLET HIKVISION DS-2CD2021G1-I

  • 1/2.7″ Progressive Scan CMOS
  • 1920 × 1080 @30fps
  • 4 mm fixed lens
  • H265+, H.265, H.264+, H.264
  • Backlight Compensation
  • 3D Digital Noise Reduction
  • Region of Interest
  • Digital Wide Dynamic Range
  • IP67





Model DS-2CD2021G1-I
Image Sensor 1/2.7″ Progressive Scan CMOS
Wide Dynamic Range DWDR
Video Compression Main stream: H.265/H.264
  Sub-stream: H.265/H.264/MJPEG
Lens 4 mm
IR Range Up to 30 m
Day/Night IR Cut Filter
Power Supply 12 VDC ± 25%
  PoE: 802.3af, class 3
Ingress Protection IP67
Dimensions 69.7 mm × 67.9 mm × 171.4 mm (2.7″ × 2.7″ × 6.7″)
 Weight 350g (0.8lb)

 

Hikvision 4 Port POE switch 

DS-3E0105P-E/M(B) is a layer 2 100M PoE switch. Based on wire-speed forwarding, the switch supports PoE power supply and extend mode. The power supply distance reaches as long as 250 m. It also supports prior and stable transmission of the important surveillance area video when connected to the high priority ports.

Feature and Function

4 x 100M PoE ports and 1 x 100M Ethernet port. Supports IEEE802.3at/af.
Supports IEEE 802.3, IEEE 802.3u and IEEE 802.3x. Supports high priority ports.

Supports 8-core power supply.
Up to 250 m transmission distance.
PoE port with 6 KV surge protection.
Supports PoE output power management.
100M network access.
Wire-speed forwarding and non-blocking design. Store-and-forward switching.
Solid high-strength metal shell.
Fan-free design with high reliability.

LBE-5AC-Gen2
Ubiquiti 5GHz Litebeam ac Gen2

450 Mbps, 23 dBi, MIPS 74Kc, 10/100/1000 Ethernet, 64 MB DDR2, 24V, 0.3A, PoE, 358 x 271.95 x 272.5 mm


The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing.

Management Wi-Fi Radio
The LiteBeam® AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.

Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the LiteBeam® AC offers a more robust mount with separate azimuth and elevation adjustments.

Now with airOS®8 and airView®
airOS®8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.

High-Gain, Directional, 2x2 MIMO Antenna
The LiteBeam® AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.

Breakthrough Industrial Design
Featuring the freedom of three-axis alignment, the LiteBeam® AC fully assembles in seconds – no tools needed. Only a single wrench is required for pole-mounting.

Compact in Size, Light in Weight
A lightweight form factor contained within ultra-compact packaging, the LiteBeam® AC is ideal for shipping and logistics.

Related products